Editorial Article
One Regulation Measures How Fast a Tyre Wears. It Excludes the Tyres That Wear Fastest — Europe Delays the Van Tyre to April 2030, and America Exempts It Entirely
There is exactly one regulation in the world that measures how quickly a tyre wears. It was written to count microplastics reaching the roadside, it applies to passenger car tyres, and it does not apply to the tyres that accumulate kilometres fastest.
That is not a loophole anybody exploited. It is a sequencing decision, written down, with dates — and the dates tell you something the tyre industry has not had to confront before: from April 2030, the light commercial tyre becomes a different commercial object from the light commercial tyre sold today. Not because the product changes, but because for the first time a buyer will be able to compare two of them on the attribute that determines what they cost to run.
What the abrasion regulation actually says
The regulation was adopted this year as ECE/TRANS/WP.29/2026/138 by the Working Party on Noise and Tyres and submitted to the World Forum for Harmonization of Vehicle Regulations, where it is numbered UN Regulation No. 186. Its scope paragraph is two sentences long and it is unambiguous:
“This Regulation applies to new pneumatic tyres of class C1 with regard to their abrasion performance. This Regulation applies only to tyres that conform to UN Regulation No. 117.”
Class C1 is the passenger car class. There are two other classes in the scheme. Class C2 is the light commercial class and class C3 is heavy commercial. Neither appears in that scope paragraph.
The class definitions themselves live somewhere else — in UN Regulation No. 54, §2.31, which type-approves tyres for commercial vehicles. C2 means “tyres identified by a load capacity index in single formation lower or equal to 121 and a speed category symbol higher or equal to N”. C3 means a load capacity index of 122 or more, or a load capacity index of 121 or less with a speed symbol of M or below.
Load index 121 is 1,450 kilograms. That is the number that decides which regulatory class a van tyre is in — not the vehicle’s gross weight, not the badge on the grille, not the marketing category the tyre was sold under. A tyre at 121 with an N speed symbol is a light commercial tyre. The same van, fitted with a 124-rated tyre, is wearing heavy commercial tyres. This is the only legal definition of a light commercial tyre that exists anywhere, and it is set by the sidewall.
The European ladder
Europe brings C2 in anyway, through a different instrument. Regulation (EU) 2024/1257 — Euro 7 — states in Article 2 that it applies to vehicles of categories M1, M2, M3, N1, N2 and N3 “and to systems, components and separate technical units intended for such vehicles, and C1, C2 and C3 class tyres, as specified in UN Regulation No 117”, with the exception of ice grip tyres.
So the coverage is complete. What is not complete is the timing. Each class gets a date for type-approval of new types, a date after which non-compliant tyres may not be placed on the market, and a date after which remaining stock may no longer be sold:
- Class C1 — new types from 1 July 2028; prohibition from 1 July 2030; stock sellable to 30 June 2032.
- Class C2 — new types from 1 April 2030; prohibition from 1 April 2032; stock sellable to 31 March 2034.
- Class C3 — new types from 1 April 2032; prohibition from 1 April 2034; stock sellable to 31 March 2036.
A light commercial tyre receives its wear limit twenty-one months after the passenger car tyre and forty-two months before the heavy truck tyre. There is nothing underhanded about that. Staging the dates by class reflects the number of sizes each class carries and the physical capacity of abrasion test facilities, both of which are real constraints.
But the consequence is worth stating plainly rather than leaving implied. For the whole of 2025 through 2029, and for most of 2030, the van is the vehicle class whose tyres have limits on wet grip, on noise and on rolling resistance, and no limit whatsoever on how fast they wear.
America exempts it permanently
The United States does not have this problem because it does not have this regulation. What it has instead is a definition by tread depth, and an exemption that falls in exactly the wrong place.
Federal Motor Vehicle Safety Standard 119 applies to, among other things, “new pneumatic light truck tires with a tread depth of 18/32 inch or greater, for use on motor vehicles with a GVWR of 4,536 kilograms (10,000 pounds) or less”. Eighteen thirty-seconds of an inch is 14.3 millimetres. At or above that depth, a light truck tyre is regulated to the light truck standard. Below it, it falls to FMVSS 109, which is the passenger car standard.
So in America the boundary of the class is a tread measurement rather than a load rating. Then the treadwear grade does the rest of the work. The Uniform Tire Quality Grading standard at 49 CFR 575.104 requires manufacturers to disclose treadwear, traction and temperature grades, and its scope paragraph reads: “This section applies to new pneumatic tires for use on passenger cars. However, this section does not apply to deep tread, winter-type snow tires, space-saver or temporary use spare tires, tires with nominal rim diameters of 12 inches or less, or to limited production tires.”
Put the two provisions together and the interlock is exact. The tyre that reaches FMVSS 119 is the tyre with a tread depth of 18/32 inch or more. The tyre that is exempt from the treadwear grade is the deep-tread tyre. They are the same tyre. The light truck tyre built for commercial wear life — the one a fleet buys precisely because it is supposed to last — is the one American law declines to grade on how long it lasts.
Three attributes out of four
None of this means light commercial tyres are unregulated, and it is worth being precise, because the imprecision is what lets the gap hide.
A C2 tyre must meet UN Regulation No. 117 limits on wet grip, on pass-by noise and on rolling resistance, and in Europe it must be labelled accordingly under the tyre labelling regime. Those three attributes are covered thoroughly. A fleet buying a van tyre can compare two products on fuel efficiency, on wet braking and on noise, using a legally mandated label with a common test method.
The fourth attribute — wear life — has no equivalent. Not a label grade, not a test method, not a disclosure. Which means the fleet can compare two tyres on three attributes that affect its costs marginally, and cannot compare them on the one attribute that determines how many tyres it buys.
The effect on competition is direct, and it is visible in the market’s own arithmetic. Pheonix’s rebuilt light commercial vehicle tyres report puts the market at USD 86.3 billion in 2025 rising to USD 136.7 billion in 2033 at 5.92 per cent, and decomposes the USD 50.4 billion added: 52.21 per cent is more tyres, 36.63 per cent is a dearer tyre and a richer mix, and 11.17 per cent is interaction. That is the most volume-led split in the tyre industry. In the passenger vehicle tyre market the same decomposition runs 68.07 per cent price and mix. In ultra-high-performance tyres volume carries 46.1 per cent.
A market that cannot measure wear cannot price it. So it prices the invoice instead, and the growth lands on the unit count rather than on the unit price.
Why the sequence is not the interesting part
The temptation is to read April 2030 as a compliance deadline and leave it there. The more useful reading is that it is the first date on which a light commercial tyre acquires a public, comparable, legally attested wear number.
On that date, and not before, a procurement team will be able to specify wear with something other than its own historical casing data. A specification that currently reads “must last as long as the last one” will be able to read “must be approved to X”. Two tyres from different manufacturers will become comparable on the attribute that decides the fleet’s cost per kilometre — currently 1.05 US cents for a set at USD 118.54 over 45,000 kilometres.
That is a change in the structure of the purchase, not a change in the product. It arrives on a fixed date, in a known sequence, twenty-one months after it reaches the passenger car. And every supplier selling C2 tyres into Europe has to hold a type-approval against it to keep selling, which means the capital is being committed now, years before anyone can charge a premium for the result.
The commercial arithmetic behind that premium — a set of four tyres at 1.05 US cents a kilometre, and up to 2.77 cents on an electric van — is worked through in the companion piece: A Van Tyre Costs 1.05 Cents a Kilometre. Electrify the Van and It Costs Up to 2.77.
The regulation that measures how fast a tyre wears was not written to help fleets. It was written to count what a tyre leaves on the road. That it will end up doing something else entirely — giving the least-differentiated purchase in the tyre industry its first real point of differentiation — is the kind of outcome that only becomes visible when you read the dates instead of the purpose.
References
- UN Regulation No. 54, §2.31, tyre class definitions — unece.org
- UN Regulation No. [186] on abrasion performance, §1.1 — ECE/TRANS/WP.29/2026/138, with scope clarification at GRBP-84-27 — unece.org
- Regulation (EU) 2024/1257 (Euro 7), Article 2 and the tyre compliance timetable, consolidated to 23 September 2026 — EUR-Lex
- 49 CFR 571.119, Standard No. 119, S1 and S3 — eCFR
- 49 CFR 575.104, Uniform tire quality grading standards, paragraphs (a) and (c)(1) — eCFR
- Pheonix Research, Global Light Commercial Vehicle Tyres Market, 2026–2033 — pheonixresearch.com
