Editorial Article

Half of America's Tractors and a Sixth of Its Trailers: Why the Trailer Is the Last Unconverted Block

Updated November 17, 2026

In the same country, under the same regulation and across the same thirteen years, air disc brakes reached roughly half of America’s heavy tractors and a little over a sixth of its trailers. The rule did not distinguish between them. The people signing the order did.

The numbers come from the ATA Technology and Maintenance Council’s own study-group session, where Cummins-Meritor presented a chart of adoption from the early 2000s to 2023: tractor uptake from under 5 per cent in 2011, a plateau between 2014 and 2016, then a steep climb to about 50 per cent. Trailers followed the same shape at much lower amplitude — flat below 5 per cent until 2016, and a little over 15 per cent by 2023.

That gap is the single largest unconverted block in the global air disc brake market, and it is worth being precise about how much money it represents. North America is USD 1,013 million of a USD 5,620 million market in 2025, growing at 8.52 per cent a year to USD 1,948 million by 2033 — the steepest rate of any mature region, and 24.2 per cent of the entire global increment. That 8.52 per cent is not a forecast about trucks. Trucks are done at 50 per cent. It is a forecast about trailers.

Why the rule converted one and not the other

The regulation in question was the National Highway Traffic Safety Administration’s revised stopping-distance rule. It did not mention discs; it set a distance. Manufacturers met the Phase One requirement with slightly larger drum brakes, but the Phase Two requirement applying to the heaviest trucks from 2013 could not be met on a drum with adequate margin on the steer axle. Air disc brakes became the practical answer.

That mechanism works identically on a trailer. A trailer has brakes, they are subject to the same performance expectations, and a disc stops it better. So why did it stop at 15 per cent?

Because the tractor and the trailer are bought by different people for different reasons. A tractor is typically specified by a large fleet that operates it, maintains it, and carries the litigation exposure when it is involved in a crash. That fleet has three reasons to pay for a better brake: it manages the maintenance cost directly, it manages its own safety record, and its counsel has explained what a plaintiff’s lawyer does with a decision to specify a lesser braking system on a vehicle that had a safer option available.

A trailer is frequently specified by a lessor or a leasing company optimising acquisition cost — and the maintenance saving from a disc brake accrues to whoever operates the trailer, which is often not whoever bought it. The premium is paid on one balance sheet and the saving is realised on another. That is the whole explanation, and it is a financing problem rather than an engineering one.

The arithmetic that should have settled it, and hasn’t

The frustrating part is that the economics are not marginal. Bendix has published figures that a fleet can check directly: disc pads lasting about 1.5 times the drum lining they replace, rotors lasting through two to three pad changes, pad replacement taking roughly a quarter of the labour time, an upfront premium of about USD 2,500 a vehicle and a lifetime saving of USD 1,200 or more, against roughly 11 per cent better stopping power.

Read that list again and notice what is doing the work. The pad-life improvement is real but modest at 1.5 times. The rotor interval is a genuine advantage. But the largest single element is the labour: a brake job that takes a quarter of the time is not just cheaper per hour, it is a truck that returns to service sooner. For a tractor on a revenue-per-mile calculation, that is the number that matters.

For a trailer, the same saving exists and is smaller in absolute terms, because the duty cycle is milder and the axle set is cheaper. A trailer axle set carried USD 425 in 2025 against USD 759 for a truck set and USD 794 for a bus set — a lighter duty rating, a simpler actuator specification and less content per corner. So the conversion case on a trailer is a lower premium against a lower saving, and it lands on a buyer who does not keep the saving. The economics are positive and the incentive is misaligned. That is a much harder problem to legislate than a stopping distance.

What would move it

Three things, in order of likelihood.

A residual-value effect. If a disc-braked trailer commands a better resale or lease-end value, the lessor’s calculation changes without any change in the operator’s saving. This is the cleanest route, because it pays the party that actually makes the decision, and it requires no new regulation at all — only enough installed base for the secondary market to price the difference.

A specification standard from the large fleets. A big carrier that specifies discs on its own tractors and then pulls a lessor-owned trailer has the commercial leverage to specify the trailer too, because the lessor wants the account. The adoption curve in tractors was driven by exactly this kind of top-down specification behaviour, and it is transferable.

A regulatory extension that reaches trailers directly. Possible, and the least likely of the three in the near term, because the regulatory attention has moved to brake particle emissions — where the instrument covers vehicles on a test cycle rather than combinations on a highway.

Worth noting what has not moved it: a decade and a half of a positive total cost of ownership case. That is a useful caution for anyone modelling technology adoption on payback arithmetic alone.

Why this is a supplier story as much as a demand story

Trailer air disc brakes are the most settled product in this market and the most contestable commercial position, and the two facts are related.

EMEA converted its trailers first. The architecture is standardised, fitment is high, and the competition is on price, weight and — critically — on whether the brake arrives as a part or as part of an assembly. A trailer maker buying an axle, a suspension and a brake as one package from one supplier is buying a simpler bill of materials and a single warranty conversation. That is why the trailer position has consolidated into chassis systems suppliers rather than brake specialists.

SAF-HOLLAND is the clearest example, and its own disclosure shows the shape of the business: number one in trailer air disc brakes in EMEA, with 51.0 per cent of FY2025 sales in trailer original equipment, 37.4 per cent in the aftermarket and only 11.6 per cent in truck original equipment. It has stated that it is leveraging existing truck customer relationships to grow air disc brake penetration in the truck and bus segment, and that its air disc brake production capacity is in place and ready to almost double output.

Read those two statements together and the strategy is unambiguous. The trailer position is mature and defensible; the truck position is the growth option; and the capacity has been built ahead of the take-rate. In North America, where trailer fitment is the variable that decides whether the regional market compounds at 8.52 per cent or stalls, that same bundling logic — axle, suspension and brake sold together to a trailer builder — is the most plausible route to converting the last large block of unconverted volume in a mature market.

What happens if it stalls

The base case in the Pheonix forecast assumes North American trailer fitment reaches roughly a third by 2033. That assumption is doing real work, and it is worth stating the downside plainly: if trailer fitment instead plateaus in its high teens, the North American line loses about a third of its increment and global 2033 value falls to approximately USD 9,100 million rather than USD 9,480 million.

The wider range runs from USD 8,300 million at 5.00 per cent a year to USD 10,650 million at 8.31 per cent. The difference between those cases is not mostly about vehicle production. It is mostly about whether a lessor in Indiana decides that a trailer brake pays for itself.

This article draws on the Pheonix Research report Global Commercial Vehicle Air Disc Brake Market Report, Size, Share and Forecast 2026–2033.

Frequently Asked Questions

How far has air disc brake adoption gone in North America?

About 50 per cent of heavy tractors and a little over 15 per cent of trailers as of 2023, according to adoption data Cummins-Meritor presented at the ATA Technology and Maintenance Council. Tractor uptake moved from under 5 per cent in 2011, plateaued between 2014 and 2016, then climbed steeply after the Phase Two stopping-distance requirement bit. Trailers stayed flat below 5 per cent until 2016 before reaching their mid-teens.

Why did trailers lag tractors so heavily if the same rule applied to both?

Because the tractor and the trailer are bought by different parties for different reasons. A tractor is usually specified by a large fleet that operates and maintains it and carries the crash-litigation exposure, so it captures the maintenance saving and manages the safety record directly. A trailer is frequently specified by a lessor optimising acquisition cost, while the maintenance saving accrues to the operator. The premium is paid on one balance sheet and the saving realised on another.

What is the total cost of ownership case for air disc brakes on a trailer?

Bendix has published figures a fleet can check: disc pads lasting about 1.5 times the drum lining they replace, rotors lasting through two to three pad changes, pad replacement taking roughly a quarter of the labour time, an upfront premium of about USD 2,500 a vehicle, and a lifetime saving of USD 1,200 or more against roughly 11 per cent better stopping power. On a trailer the premium is lower and the saving is lower, because a trailer axle set is a lighter-duty part — it carried USD 425 in 2025 against USD 759 for a truck set.

How much of the North American forecast depends on trailers?

North America is USD 1,013 million of a USD 5,620 million market in 2025 and grows 8.52 per cent a year to USD 1,948 million by 2033 — the steepest rate of any mature region. Because tractor fitment is already around 50 per cent, that growth is predominantly a forecast of trailer conversion. If trailer fitment plateaus in its high teens instead of reaching roughly a third, the North American line loses about a third of its increment and 2033 global value falls to approximately USD 9,100 million.