Editorial Article

Fewer Litres, More Money: What Electrification Is Actually Doing to the Lubricants Business

Updated November 17, 2026

For the better part of a decade the lubricants industry has been writing its own obituary. The argument was simple and, at first hearing, unanswerable: an electric car has no engine, therefore it has no engine oil, therefore electrification is a slow subtraction from the largest product line in the business.

Every part of that sentence is true. The conclusion drawn from it is not.

The subtraction is real, and it is bigger than people say

A conventional car carries four to seven litres of engine oil that is drained and replaced repeatedly across its life. That revenue does not migrate to an electric vehicle. It does not shrink; it disappears. Nothing in the electric drivetrain replaces it litre for litre, and any forecast that implies otherwise is selling comfort rather than analysis.

What replaces it is smaller, harder to make, and considerably more expensive per litre. Our rebuilt figures put the global market for electric-vehicle-specific lubricants and functional fluids at USD 2,550 million in 2025, rising to USD 8,340 million by 2033 at a compound annual growth rate of 15.97%. Volume moves from 357,000 tons to 1,098,000 tons at 15.08%. Those two growth rates being almost identical is the most important thing in this piece: almost none of this forecast comes from price. It comes from counting vehicles.

And that is where the industry’s arithmetic went wrong. Fluid demand tracks the vehicle parc, not the sales chart. During a transition the parc compounds far faster than sales do, because every year adds a cohort that stays on the road for fifteen years. The International Energy Agency’s Stated Policies Scenario puts the global electric fleet, excluding two- and three-wheelers, at 250 million by 2030, four times its end-2024 level, with more than 90% of it electric cars. That is roughly 25% stock growth a year, about half the 2018-2024 pace but still compounding. Forecast a fluid market off vehicle sales instead of the stock, and you will understate it by nearly seven points a year for eight years, which is the difference between USD 4.6 billion and USD 8.34 billion by 2033.

One fluid, four jobs, and a warranty attached

In an internal-combustion car the transmission fluid does one job: lubricate a gear set and survive. In an integrated e-axle the same fluid is asked to lubricate the reduction gear and bearings, cool the motor directly, insulate live components sitting in the same housing, and remain compatible with enamelled copper windings, polyamide housings and potting compounds at temperatures that would once have been treated as a fault.

That combination is why this became a chemistry problem rather than a viscosity problem, and why the technical literature on e-axle integration draws such a hard line between a dry motor and an integrated one. If the motor is separately cooled, a conventional lubricant will do. If the motor is cooled by the axle fluid, the requirements change materially, because the fluid is now inside the electrical machine rather than beside it.

This is where the specification authority moved, and almost nobody outside the industry has noticed. The old model had one fluid specification that mattered, set by the engine manufacturer. The new model has several, set by whoever designed the e-axle and the thermal loop: Bosch, GKN, Magna, Hitachi Astemo, Nidec, and the in-house units at the largest manufacturers. They warrant the hardware. A fluid company with relationships only at the vehicle brand is selling to the wrong room.

The number the industry should be staring at

Headline growth is the least interesting figure in this market. The composition is the story.

In 2025, factory fill accounts for 48.0% of value and service fill for 45.0%, with dielectric and immersion fluids a rounding error at 7.0%. By 2033 those become 27.6%, 59.2% and 13.2%. The line that fills the vehicle at the plant grows at roughly 8.2% a year. The line that services it grows at about 20%. The line that cools an immersed pack grows at about 25.5%.

None of that is optimism. It is the arithmetic of a parc that stops being young. In 2025 the global electric fleet is small enough that a quarter of it was built in the same year. By 2033 new production is a small fraction of the fleet, and the aftermarket becomes the majority of the category by default.

The commercial consequence is blunt. A first-fill approval is not a revenue stream; it is a reference that buys roughly 9.8 litres-equivalent once per vehicle and the right to be specified when that vehicle eventually needs fluid. A supplier holding the approval and nothing else will grow at half the market rate. A supplier holding no approval will not grow at all, because in this category the specification is the product.

Lifetime fill is deferred revenue, not cancelled revenue

The most contested claim in the category is that electric drivetrains are filled for life. Sometimes they are. Toyota moved its hybrid and electric range from WS automatic-transmission fluid to a dedicated e-Axle Fluid TE from model year 2023, with ENEOS as a factory-fill supplier, and does not call for a scheduled change under normal conditions. That looks like the end of the aftermarket.

It is not, for two reasons. The first is in the service literature itself: most real driving falls into the severe-duty category that the schedule excludes, and technicians commonly recommend a change somewhere between 40,000 and 60,000 miles. The second is that the 2018-2022 electric cohort is now leaving warranty in volume, which means the first large population of EV owners paying for fluid out of their own pocket, and a workshop network that is not yet trained for them.

An unpriced aftermarket already being served by independent workshops is the most commercially attractive thing in this market. It is also the least defensible for an OEM that has spent years validating a fluid and then published a schedule that tells the owner nothing needs doing.

The chemistry is being reclassified while it is being scaled

The regulatory file that matters here is not written about cars. It is written about substances.

The European Union’s proposed universal restriction on per- and polyfluoroalkyl substances reaches lubricants directly. The European Chemicals Agency’s Committees for Risk Assessment and Socio-Economic Analysis reached provisional conclusions on lubricants in June and September 2025 respectively, with a final risk opinion planned for March 2026 and a socio-economic opinion expected by the end of that year. Fluorinated thickeners sit inside high-value EV greases. Fluorinated dielectric fluids sit inside two-phase immersion cooling.

That second case has already resolved itself, and not in the industry’s favour. The withdrawal of the principal fluorochemical producer from the chemistry removed the supply of the fluids that made two-phase immersion work, and the engineering response was to change architecture rather than supplier: single-phase water-glycol direct cooling, the same 75/25 solution now dominant in data centres, rather than a search for a drop-in fluorinated replacement.

A category that was going to be built on one chemistry is being rebuilt on another, and the rebuild is happening during the scale-up rather than before it. Suppliers who began reformulating before the timetable was published will own the replacement specifications. Suppliers waiting for the final opinion will be reformulating against a deadline they cannot meet, in a category where an approval takes years.

What the ownership market says

On 24 December 2025 bp agreed to sell a 65% shareholding in Castrol to Stonepeak at an enterprise value of USD 10.1 billion, implying around 8.6 times last-twelve-months EBITDA, with completion expected by the end of 2026 and bp retaining 35%.

Read that multiple carefully. It is not a growth multiple. It is what a lubricants franchise with a genuine EV fluids line, an approval book and a service network is worth when an infrastructure investor underwrites its cash flows. That benchmark is useful and sobering at the same time: the strategic value of an EV fluid approval is high, but the earnings it produces are still lubricant earnings, and they should be capitalised as such. Anyone modelling this category off a technology multiple is going to be disappointed by the income statement.

The two things that would break this forecast

The first is genuine lifetime fill at scale. If sealed-for-life e-axles and coolant loops become the norm with no severe-duty exception, service fill does not reach 59% of value in 2033 and the market lands closer to USD 6 billion. The indicator is the service schedule, not the press release, and it costs nothing to monitor.

The second runs the other way. A directly cooled pack takes 40 to 60 litres of dielectric fluid where a cold-plate pack takes none. If even a fifth of new production moved to immersion cooling, the dielectric line alone would exceed the entire 2025 market. That is a materials-availability question rather than a demand question, which is why the PFAS timetable and the immersion upside are the same story told from opposite ends.

What is not a plausible outcome is the one the industry has spent a decade expecting. Fewer litres per vehicle, more value per litre, and a service market that becomes the majority of the category by the early 2030s. The arithmetic is not ambiguous. The risk is that the industry acts on the story instead.

The full six-chapter analysis, with regional and product segmentation, the approval ladder, the PFAS calendar and the disclosed model coefficients, is in the Global Electric Vehicle (EV) Lubricants Market report.