Editorial Article

Sixty-One Per Cent of the Nuclear NDE Workforce Leaves Within Sixteen Years. That Is a Radiography Forecast.

Updated November 17, 2026

Ask nuclear nondestructive evaluation practitioners when they plan to leave the field, and the answer is not a projection. It is a date.

In a 2024 EPRI survey of 82 nuclear-sector NDE professionals, 37 per cent said they expect to retire by 2030. Another 24 per cent said they would follow within the decade after that — a combined 61 per cent of the nuclear NDE workforce gone within sixteen years, reported in ASNT’s Materials Evaluation. Asked a more pointed question — whether the industry would have enough NDE personnel to meet future needs — 60 per cent said no.

That is not an analyst’s model. It is the people doing the work, telling the industry what they intend to do. And it lines up with the wider picture: the ASNT Foundation’s 2025 Economic Impact of NDT report found that 42 per cent of the US NDT workforce is 45 or older, a share the report itself calls a demographic turning point.

This is normally read as a labour-market story. It is a market-forecast input, and in industrial radiography it may be the most important one.

Why a retirement curve is a radiography number

Radiographic inspection is bought on cost per accepted inspection, and that cost is dominated by three things that are all labour: set-up time, re-shoots, and the grade of person required to interpret the image.

The arithmetic is not subtle. North Star Imaging’s own case documentation for a foundry conversion puts a film exposure on an aluminium casting at roughly 30 seconds, plus at least another 30 seconds of set-up including tube ramp and door time. Moving the same part to a digital system gives around three seconds of imaging time with no set-up and no downtime between acquisitions. Motion-programmed digital inspection, the company reports, delivers a four to ten times improvement in speed on that basis alone.

Put those two facts together — a workforce losing 61 per cent of its experienced people within sixteen years, and a technique that converts over a minute of labour per exposure into three seconds — and the direction of travel stops being a matter of technology preference. Digital radiography’s commercial case is man-hours, and every year the workforce ages, that case gets stronger without anyone having to argue for it.

The awkward part

There is a second-order effect, and it is the one that does not appear in equipment suppliers’ marketing.

The people who can qualify a digital technique — write the procedure, argue it to a notified body, get it accepted into a prime’s specification — are the same experienced people who are retiring. Conversion in this market is not gated by the availability of a detector. It is gated by permission, granted contract by contract, and permission requires a qualified person to sign it. ISO 17636-2 sets the technical basis for digital radiography of welds at film-equivalent sensitivity; ASME’s Section V Article 2 carries digital detector requirements in Mandatory Appendix IX; ASTM E2698 and E2737 govern detector array examination and detector stability. Every one of those is a permission, and every one of them requires someone competent to apply it.

Which means the retirement curve cuts both ways. It accelerates the commercial case for digital and it thins the population able to approve it. That is why our forecast has the market’s chain count growing only 1.14 per cent a year while value grows 6.19 per cent — the constraint on unit growth is not demand, it is inspection capacity.

What the industry has already done about it

The ASNT board approved a National Apprenticeship Program in 2026, explicitly framed against this backdrop. That is a real response, and it is also a slow one: an apprentice radiographer takes years to reach the certification levels that make them useful on a nuclear outage schedule, and the retirement dates in the EPRI survey do not move.

For equipment suppliers, the strategic read is straightforward. The buyer’s constraint is certified hours, so anything that reduces certified hours per inspection sells — automation, motion programming, automated defect recognition, throughput per shift. That is why digital detector arrays in our model compound at 12.74 per cent while computed radiography, which keeps a separate scanning step and cannot be automated in production, grows revenue at 1.32 per cent. The labour shortage does not favour digital in general. It favours the part of digital that removes handling.

The uncomfortable risk

The same workforce data constrains the forecast in the other direction. If the population of certifiable inspectors shrinks faster than productivity per inspector rises, inspection capacity itself becomes the limit on the end markets — and the 1.14 per cent volume line in our model would be too high, not too low.

That is a genuine two-sided risk, and it is why we treat the labour constraint as a modelled input rather than a narrative theme. A supplier planning capacity against a demand curve, and a buyer planning a conversion against a retirement calendar, are looking at the same number from opposite ends.

This article draws on the Pheonix Research report Global Industrial Radiography & Digital X-ray Inspection Market, Size, Share and Forecast 2026–2033. Sources cited in-line: EPRI’s 2024 Nuclear Nondestructive Examination Workforce Study as reported in ASNT’s Materials Evaluation, September 2026; the ASNT Foundation’s 2025 Economic Impact of NDT; ISO 17636-2:2022; ASME BPVC Section V Article 2 and Mandatory Appendix IX; ASTM E2698 and E2737; North Star Imaging’s digital radiography case documentation. No third-party market estimates are used.

Frequently Asked Questions

How much of the NDT workforce is retiring, and by when?

Sixty-one per cent within sixteen years. In a 2024 EPRI survey of 82 nuclear-sector NDE professionals, 37 per cent expected to retire by 2030 and a further 24 per cent within the following decade. Separately, the ASNT Foundation's 2025 Economic Impact of NDT report found 42 per cent of the US NDT workforce is 45 or older.

Why is a retirement curve a market forecast for radiography?

Because radiographic inspection is bought on cost per accepted inspection, and that cost is dominated by labour: set-up time, re-shoots and the grade of person interpreting the image. North Star Imaging's own case documentation puts a film exposure on an aluminium casting at about 30 seconds with another 30 seconds of set-up, against around three seconds of digital imaging with no set-up — and reports four to ten times faster inspection from motion-programmed digital systems.

Is the workforce shortage good or bad for digital radiography suppliers?

It cuts both ways. Digital's commercial case is built on man-hours per inspection, so a shrinking workforce strengthens it every year. But the people who can qualify a digital technique — write the procedure, get it accepted into a prime's specification or by a notified body — are the same experienced people retiring. Conversion in this market is gated by permission, not detector availability, so the retirement curve both accelerates demand and thins the population able to approve it.

Why does computed radiography lose out if both are digital?

Because computed radiography keeps a separate scanning step and cannot be automated in a production line, so it removes less labour per inspection than a detector array does. In our model digital detector arrays compound at 12.74 per cent while computed radiography grows revenue at 1.32 per cent with falling spend per chain. The labour shortage does not favour digital in general; it favours the part of digital that eliminates handling.