Press Release

Commercial Vehicle Brake Friction Is a USD 9.45 Billion Market Where Four Dollars in Five Are Spent After the Truck Is Built — and 45.4 Per Cent of Its Growth Is Price

· Automotive & Transportation

The global market for commercial vehicle brake friction products reached USD 9,449 million across 107.86 million axle sets in 2025 and is forecast to reach USD 14,700 million across 140.60 million axle sets by 2033, according to a new report from Pheonix Research. The 5.68 per cent compound annual growth rate compares with 3.37 per cent growth in volume, and the gap between those two numbers is the central finding of the report.

USD 5,251 million of value is added between 2025 and 2033. Of that increment, USD 2,868 million comes from additional axle sets and USD 2,383 million — 45.4 per cent — arrives through price, specification and mix rather than through more vehicles. The growth of this market is therefore not a function of truck production. It is a function of what is bolted to each axle.

Four dollars in five are spent after the truck is built

The aftermarket is 79.6 per cent of 2025 value at USD 7,517 million, and grows 6.00 per cent against 4.37 per cent for original equipment supply, reaching 81.5 per cent of value by 2033. The reason is physical rather than strategic: a long-haul tractor consumes roughly one and a half axle sets of friction material a year, which is about fifteen relines over a ten-year life against one set of calipers.

“OE nomination buys the specification and the aftermarket buys the margin,” the report notes. “Suppliers accept the first to own the second, which is why every large friction manufacturer runs both and why a supplier that loses a nomination fights hard to keep the aftermarket listing for the same part number.”

The two product forms are moving apart

Disc brake pads were 46.0 per cent of 2025 value at USD 4,347 million and reach 57.0 per cent at USD 8,379 million in 2033, growth of 8.55 per cent a year. Drum brake linings, still the larger business in 2025 at USD 5,102 million, grow 2.71 per cent to USD 6,321 million.

“Both product forms are fitted to the same vehicles,” the report states. “The gap between them is the air disc brake conversion arriving as a revenue-mix event rather than a unit event. A disc axle set sells for more than the drum axle set it displaces, so the conversion lifts the value line while leaving the unit line almost untouched.”

China holds, Europe slows, India accelerates

China holds 27.5 per cent of 2025 value and 27.8 per cent of the increment — it neither gains nor loses share. Europe holds 21.0 per cent of value but only 17.3 per cent of the increment at 4.81 per cent, on the oldest parc and the longest reline intervals. India is the fastest large market at 8.14 per cent, holding 8.5 per cent of value and 13.3 per cent of the increment.

The regulatory clause that reaches the aftermarket

UN Regulation No. 179, adopted by the UNECE World Forum for Harmonization of Vehicle Regulations on 11 March 2026, establishes the first internationally harmonised laboratory procedure for measuring and limiting brake particle emissions — PM10 limits in milligrams per kilometre, measured on a brake dynamometer cycle — and enters into force by the end of 2026. Its primary scope is passenger cars (M1) and light commercial vehicles (N1), with optional application to certain light N2 vehicles, so it does not reach a heavy commercial vehicle today.

The clause that matters for this market is a statement accompanying the regulation: UNECE says a similar regulation for replacement braking systems is being finalised, so that an approved vehicle with low-emission braking delivers low emission levels for its whole life even when brake parts are replaced. Friction is the part that gets replaced.

“No regulation in any major market mandates what a truck brake lining must be made of,” the report states. “What regulation does is progressively change the set of tests a friction product must pass to be sold and to keep a vehicle in service. Each of those changes has a cost, and the cost is not borne equally.”

What the roadside data shows

At the Commercial Vehicle Safety Alliance’s 2026 Brake Safety Week, 2,369 of 15,528 inspections — 15.3 per cent — resulted in a brake-related out-of-service violation. Inspectors recorded 141 drum and rotor violations, of which 97 were on air disc brakes and 36 on S-cam drum brakes. Forty-five of those were rusted rotors, a condition associated with a friction surface that stops being used as regenerative braking takes a larger share of braking energy.

“Disc conversion does not remove inspection failure; it changes its signature,” the report notes. “The raw counts are a composition effect and not a failure rate, because nobody published how many disc-equipped vehicles were inspected.”

About the report

Global Commercial Vehicle Brake Friction Products Market Report, Size, Share and Forecast 2026–2033: Four Dollars in Five Are Spent After the Truck Is Built is published under Automotive & Transportation in the Commercial Vehicle Chassis & Braking segment. It runs to six analytical chapters with full tabular and graphical annexes, and is built on a 70/30 basis of secondary evidence and Pheonix Research’s own primary-layer market construction. It cites no third-party market-research publication.

About Pheonix Research

Pheonix Research publishes market intelligence built from primary-layer market construction and validated secondary evidence, with every figure attributed in the sentence in which it appears.

Media enquiries: via pheonixresearch.com.