Press Release
Global Off-the-Road (OTR) Tyres Market Outlook 2026–2033
23 April 2026 | Pheonix Research
The global off-the-road tyre market was worth USD 25,900 million in 2025 and reaches USD 35,600 million by 2033, a value CAGR of 4.06% — against tonnage growth of just 2.03%, from 3,150 to 3,700 kilo tons. Pheonix Research publishes the full findings in its Global Off-the-Road (OTR) Tyres Market Report, Size, Share and Forecast 2026–2033.
Two growth rates that far apart invite the obvious scepticism, so the report states its arithmetic rather than asserting its forecast. Realised revenue per kilogram rises from USD 8.22 in 2025 to USD 9.62 in 2033 — an increase of 17.03%. That is the whole of the difference between the value line and the volume line, and it is the commercial argument of the report.
Key findings
- Value grows from USD 25,900 million (2025) to USD 35,600 million (2033) at 4.06%; volume from 3,150 to 3,700 kilo tons at 2.03%.
- Realised revenue per kilogram rises from USD 8.22 to USD 9.62, up 17.03% across the window.
- Agriculture is the largest application at USD 9,800 million, or 37.8% of 2025 value, growing 3.29%.
- Construction and mining is USD 9,400 million, or 36.3%, growing 4.73% — the faster line on a base almost as large, and the source of most of the added value.
- Asia-Pacific holds 47% of 2025 value, rising to 49% by 2033, at roughly half the revenue per kilogram realised in North America and Europe.
- Replacement is approximately two-thirds of value worldwide, and more than that in mature markets. Retreading is excluded from the value figures and modelled as substitution.
- Three transactions in twenty months reorganised the top of the market: Titan and Carlstar (approximately USD 296 million, February 2024), Yokohama and Goodyear’s OTR business (USD 678 million, completed 4 February 2025), and CEAT and Michelin’s Camso compact construction line (1 September 2025).
- OTR tyres sit outside the EU tyre labelling regime, while the EU Deforestation Regulation brings natural rubber into due diligence from 30 December 2026.
The gap between the two lines is the business
Value and volume diverging this sharply is not a pricing assumption dressed as a forecast. It is the observed behaviour of a category in which the tonne is losing importance and the casing is gaining it. Four things carry the mix: rim-size migration toward 49- to 63-inch mining radial, the radialisation of construction machines, IF and VF fitment in agriculture, and the spread of tyre-management contracts that price the casing per machine-hour or per tonne moved rather than selling a tyre and closing an invoice.
Retreading sits underneath all four, and the report handles it in an unusual way. Because a managed casing that is retreaded twice displaces two new tyres, retreading is excluded from the value figures and modelled as substitution. The consequence is counter-intuitive and worth stating plainly: the more successful the service layer becomes, the slower tonnage grows, and the richer the value line gets. That is the mechanism behind 2.03% against 4.06%, and it is why the two numbers cannot be read independently of one another.
The curing press, not the brand, is the moat
An off-the-road tyre is a low-technology product made with very high technology. Materials account for 50–60% of the cost of goods, with conversion energy, labour and overhead making up the balance — but that material share falls as the article gets larger, because a giant radial consumes disproportionately more curing time, more press occupancy and more skilled building labour per kilogram.
Curing is the bottleneck. A large OTR tyre occupies a press for hours rather than minutes, and the press itself is a capital item with a long lead time and a hard size ceiling. Everything upstream of the press can be replicated with money. The press cannot be replicated with money inside a normal cycle. That is the structural reason the large-size market has never been successfully attacked from below, and the reason every strategic move in this category is ultimately a move on large-size capacity rather than on brand.
Two-thirds of the value is replacement, and that is where the profit sits
Replacement is roughly two-thirds of value globally and considerably more than that in mature markets. Original-equipment fitment is a reference sale — thin margin, long approval cycle — worth doing only because a machine builder’s specification drives twenty years of replacement demand in that size. The pricing power then moves with size. In small bias sizes it sits with the distributor, because the product is interchangeable and the customer is local. In large radial sizes it sits with the manufacturer, because the customer is institutional and cannot switch on a machine that is standing still.
Three transactions in twenty months reorganised the top of the market
Titan International acquired Carlstar for approximately USD 296 million in February 2024. Yokohama completed its purchase of Goodyear’s USD 678 million OTR business on 4 February 2025. CEAT completed its acquisition of Michelin’s Camso compact construction line on 1 September 2025.
Read together, these are not a consolidation story about brand portfolios. Each is a purchase of capacity in a specific size band, and the Camso transaction is the clearest case: compact construction is the most contested band in the category, where the machine builder’s specification is still open and the replacement base is still growing. The report covers six tier-one players, with Michelin and Bridgestone at the top, but its finding is that position at the top follows capacity and approval rather than aggregate market share.
The largest application grows slowest, and the volume centre is not the value centre
Agriculture remains the largest application by value at USD 9,800 million, 37.8% of the 2025 market, and grows slowest at 3.29%. Construction and mining is USD 9,400 million, 36.3%, growing at 4.73% — more than a percentage point of extra growth on a base almost as large, which is why it supplies most of the added value in the forecast rather than agriculture.
Geography splits the same way. Asia-Pacific holds 47% of 2025 value, rising to 49% by 2033, at roughly half the revenue per kilogram realised in North America and Europe. The volume centre and the value centre of this market therefore sit in different places, and the global growth rate is a weighted average of two businesses with different customers, different products and different price mechanics.
Regulation arrives through the supply chain, not the product
OTR tyres sit outside the EU tyre labelling regime entirely, so a label has no bearing on a haul-truck radial. What does bind is the EU Deforestation Regulation, which brings natural rubber into due diligence from 30 December 2026.
Natural rubber is produced by smallholders across Thailand, Indonesia, Vietnam, India and West Africa and aggregated through trading houses — and that aggregation is where traceability is lost. A manufacturer that can document plot-level origin is selling into the European market after December 2026; one that cannot is not. Traceability therefore stops being a compliance footnote and becomes a market-access asset with a cost line attached, which is a new kind of competitive variable in a category that has historically been regulated by trade remedy rather than by specification.
“This is not a market growing because more machines are being built. It is a market growing because the tyres on those machines are getting larger, more radial and more closely managed — and because the casing, not the kilogram, is now what the customer is buying.”
Global Off-the-Road (OTR) Tyres Market Report, Size, Share and Forecast 2026–2033
Methodology
The forecast is built bottom-up by application and size class from a 2025 base, cross-checked against machine-builder and distributor disclosures, natural rubber and steel cord cost benchmarks, and trade data, then extended to 2033. Value and volume are modelled separately rather than derived from one another, which is what allows the two growth rates to diverge honestly. Every coefficient is disclosed in the methodology chapter of the report.
Scope, and what the report deliberately excludes
Three boundaries are drawn on purpose. Retreading is excluded from value and modelled as substitution, as set out above. The tyre-management service layer is treated as a demand mechanism that alters tonnage and mix, not as a separate revenue pool added to the total. And the small bias sizes that dominate unit counts are weighted at their realised price rather than at parity with radial, because they are not the same product and do not carry the same margin.
The report is the demand-side companion to Pheonix Research’s Global Agricultural Tyres and Global Industrial & Specialty Tyres reports, and it shares its radial-versus-bias framework with Global Radial vs Bias Tyres. The parent volume, Global Tyres Market Report, sets the total within which these applications sit.
About Pheonix Research
Pheonix Research is a global market intelligence and strategic advisory firm covering automotive, mobility, manufacturing and industrial markets. Its reports combine bottom-up sizing, primary operator interviews and a graph-linked evidence base, and every forecast states the coefficients behind it.
Media Contact
Pheonix Research
Email: [email protected]
Website: www.pheonixresearch.com
