Press Release

Two-Thirds of the World's Sack Kraft Paper Never Becomes a Sack, and Price Is 52.5 Per Cent of the Growth — From 30 December 2026 Every Tonne Also Needs a Deforestation File

· Packaging

Overview

Two-thirds of the world’s sack kraft paper no longer becomes a sack, and slightly more than half of this market’s growth is the price of the paper rather than the quantity of it. Pheonix sizes the global sack kraft paper market at USD 7,620 million in 2025, reaching USD 9,880 million by 2033 — a 3.30 per cent value CAGR — on 7,400 thousand tonnes of paper rising to 8,300 thousand tonnes at 1.45 per cent. The blended mill-realised price moves from USD 1,030 a tonne to USD 1,190, 1.82 per cent a year.

Those three rates are the report. A material named after its destination has lost that destination as a majority outlet, and a market growing 1.45 per cent in tonnage is growing 3.30 per cent in value because the difference is being paid for in price. Of the USD 2,255 million of value growth, USD 927 million comes from extra tonnage at 2025 prices, USD 1,184 million from higher prices at 2025 volume, and USD 144 million from the interaction. Volume supplies 41.1 per cent of the growth and price 52.5 per cent — which is the reverse of the woven polypropylene sack market this one competes against, where the growth is cheaper material replacing expensive material.

Component of value growth, 2025–2033 USD million Share of growth
Tonnage at 2025 prices 927 41.1%
Price at 2025 volume 1,184 52.5%
Interaction 144 6.4%
Total 2,255 100%

The decomposition is unusual in industrial packaging and it is structural rather than cyclical. The cost base of a sack kraft machine is energy, long-fibre softwood and capital, and all three have inflated faster than the price of a cement sack. What a mill can raise, it raises to recover cost. This is a cost-driven market wearing a demand story.

The finding is a boundary problem, not a growth problem

The global industrial multiwall sack market is 18.35 billion sacks at an average of 128 grammes, which is roughly 2,349 thousand tonnes of paper. This report sizes the paper itself at 7,400 thousand tonnes. On those two numbers, only 31.7 per cent of the world’s sack kraft paper still goes into an industrial sack. The other 5,051 thousand tonnes — 68.3 per cent — goes into carrier and consumer bags, wrapping and e-commerce void fill, food-service converting and specialty grades.

The operators already know this and said so on the record. One European producer told a price reporting agency that a decade ago 100 per cent of the paper it sold was converted into sacks, that today it is under 70 per cent, and that up to 35 per cent now goes into new applications such as filler for e-commerce.

Read that against what happened to sacks themselves and the survival becomes explicable rather than surprising. Paper sack deliveries in Europe fell 15.9 per cent in 2023, then recovered 2.2 per cent in 2024 to 5.32 billion units and 2.7 per cent in 2025 to 5.69 billion. A 15.9 per cent collapse in sack deliveries ought to have taken 15.9 per cent out of sack kraft demand. It did not, because the sack had already stopped being the only outlet.

The two markets inside the one tonnage then diverge, and the divergence is quiet:

  • The sack grows 1.42 per cent in tonnage — slower than the paper it is made from — and is 31.4 per cent of 2025 value, 31.3 per cent of 2033 value, supplying 31.0 per cent of the value growth. Nothing in its arithmetic is broken. It is simply no longer where the market is going.
  • Wrapping, void fill and e-commerce grows 4.40 per cent in tonnage and 6.66 per cent in value, from 1,470 million to 2,462 million, and supplies 43.9 per cent of the market’s value growth from 19.3 per cent of its value. In tonnage it nearly catches the sack by 2033 — 2,305 thousand tonnes against 2,630 — and in dollars it never does, because void fill is a brown grade at USD 900 a tonne against the sack’s USD 1,017.
  • Carrier and consumer bags are the only outlet that shrinks: 1,886 thousand tonnes down to 1,713, minus 1.20 per cent a year, and still 0.52 per cent in value on 1.74 per cent of price. The paper carrier bag’s substitution wave has already broken — the plastic legislated out of European retail between 2018 and 2024 has been substituted, and several of the same instruments now point at paper. A row that is 26.0 per cent of today’s value and 3.7 per cent of its growth is not a market to build a machine for.
  • Food service and other converting grow 1.50 and 0.34 per cent in tonnage and 3.61 and 2.48 per cent in value, because both are bleached, both carry a barrier or a print specification, and both price well above the blend at USD 1,128 and USD 1,197 a tonne. Together they are 23.4 per cent of 2025 value, supplying 21.4 per cent of the value growth from 20.7 per cent of the tonnage.

A paper machine built for a cement customer in 2015 is being sold into an e-commerce customer in 2030, and the grade specification barely changes. Sack kraft is no longer a sack material. It is becoming a general-purpose kraft substrate, and the substrate has decoupled from the sack.

Europe makes thirty per cent of it, consumes seventeen, and sets the price

Europe is the industry’s factory and the least relevant thing in its own market. European mills produce about 2,243 thousand tonnes in 2025 — 30.3 per cent of world supply — from installed capacity of roughly 2,534 thousand tonnes at operating rates of 87 to 90 per cent. Of that output, 1,250 thousand tonnes is consumed inside Europe and 993 thousand tonnes is exported net, so the region ships 44.3 per cent of everything it makes out of the region. What that arithmetic also leaves is roughly 291 thousand tonnes of European capacity running idle or intermittently — 11.5 per cent of the installed base — and it explains every closure decision in the region.

Europe is also the only region where all four numbers are measured rather than modelled, which is why it anchors the global base. Its regional value is USD 2,050 million, 26.9 per cent of the world, growing 2.04 per cent — the slowest region in the report and the one that sets the world price. Asia-Pacific is USD 2,180 million at 4.67 per cent, North America USD 1,290 million at 3.43, Latin America USD 1,010 million at 3.50 and Middle East and Africa USD 1,090 million at 2.32.

And Europe’s own consumption is not what the industry imagines. Of 1.25 million tonnes consumed, only 728 thousand tonnes becomes the 5.69 billion sacks the industry delivers — 58.2 per cent. The other 522 thousand tonnes never enters a sack at all.

The capacity story is routinely reported as a retreat. It is a swap, and the arithmetic changes the conclusion. In October 2024 Mondi permanently closed its Stambolijski sack kraft mill in Bulgaria — some 100 thousand tonnes a year of unbleached sack kraft, fire-damaged and uneconomic to rebuild. Two months later, in December 2024, the same company started up a 210 thousand tonne machine at Štětí in the Czech Republic inside a EUR 400 million investment, inaugurated in November 2025 and justified explicitly on paper-based flexible packaging demand driven by e-commerce. Net European capacity rose by about 110 thousand tonnes across those two decisions, at roughly EUR 1,900 of capital per annual tonne on the one hand and a write-off on the other.

The strategic content is not the tonnage. It is that a small single-machine site in a peripheral region was replaced by double the output at an integrated mill where pulp, energy, wood supply and logistics already existed. In this industry capacity follows fibre, not demand. The proof is the project that did not happen: Mondi’s proposed sack kraft machine in Canada, aimed squarely at a North American market where kraft and specialty packaging paper demand grew 5 per cent in 2025, was paused in October 2025 on macroeconomic grounds. On current evidence, the fibre wins.

The regulation that burdens every tonne is also the one that protects it

From 30 December 2026, operators and traders placing chapter 48 paper products on the EU market, or exporting them, must hold a due diligence statement filed through TRACES. The obligation covers, per consignment, the HS or CN code, quantity, country of production, direct supplier and client, the date range of production, evidence of legal harvest, and the geolocation of the plots of harvest — as polygons with six decimal places of latitude and longitude for any plot over four hectares, and a single point below that. For the wood commodity, which includes pulp and paper, the scientific name of the species is mandatory on every relevant product.

Two features of the timetable matter more than the date. Regulation (EU) 2025/2650, adopted on 19 December 2025, postponed application by one year to 30 December 2026 for medium and large operators and 30 June 2027 for micro and small enterprises — but in the forest-based value chain the entry into application is 30 December 2026 irrespective of company size. And the obligation attaches to the operator that first places the product on the market, which for European paper sold in Europe is the mill, and for imported paper is the EU importer.

That single clause reorganises the competitive map. A Nordic or Central European mill buying softwood from a known, registered, certified procurement area already holds the data the regulation demands, with two years of building the system behind it. A mill selling into Europe from a region with opaque forest sourcing must now supply plot-level geolocation to its European customer, who becomes legally liable for it. The cost is not a tax. It is a data system, and a data system is a fixed cost that favours large integrated producers over small ones.

Then the twist, and it is the hinge of the whole market. Products made entirely from recovered fibre that has completed its lifecycle are outside the regulation and require no due diligence statement at all. The material with the weaker physical properties has the cleanest file.

It does not hand the market to recycled paper, and the reason is physical rather than legal. A multiwall sack carrying 50 kilograms of cement through a drop test is specified on tensile energy absorption and tear resistance, and that performance comes from long softwood fibre. Recycled fibre is shorter, has been through at least one drying cycle, and loses strength with each one. The EUDR-free material and the EUDR-burdened material are not substitutes in the band that matters, so the regulation widens a moat without opening a door.

The corollary is the thing to watch. If recycled content ever does reach the strength required, it arrives with no deforestation file, a lower carbon footprint and a lower fibre cost, all at once — the most disruptive event available to this market, and a materials-science question rather than a policy one.

Add the second asymmetry and the position becomes unusual in industrial packaging. Recycled fibre carries mineral oil hydrocarbons from printing inks in the recovered stream, and food-contact converters have spent a decade reformulating around them. Virgin kraft has no such legacy load. Virgin fibre is the material with the heaviest deforestation obligation and the cleanest food-contact file, and recycled fibre is the reverse. The buyer who needs both properties has one material that satisfies them. That is why the food and feed share of this market grows faster than the cement share.

Two producers, one product, opposite conclusions

Five producers account for roughly 30 per cent of world capacity and effectively all of the merchant export trade, and two of them have made opposite calls on the same product in the same two years — both of them visible in public documents.

Billerud, number five in sack paper globally on capacity, classifies its focused category positions explicitly: “optimize target applications” for sack paper, alongside “maintain strong position” for liquid packaging board, “accelerate growth” for cartonboard and coated liner and “drive value” for MG paper. That is a harvest position stated plainly by the world’s fifth-largest producer. Its sack paper market status was reported as weak in the fourth quarter of 2025 with a weak outlook for the first quarter of 2026, and segment net sales fell 17 per cent year on year to SEK 705 million. Yet sack paper was also the only product category in which Billerud’s 2025 net sales did not decline — SEK 3,258 million against SEK 3,240 million — in a year when group sales fell 9.5 per cent and operating profit fell from SEK 1,511 million to SEK 416 million.

Mondi spent EUR 400 million on 210 thousand new tonnes of the same product and inaugurated it in November 2025. The disagreement is not about demand. It is about which assets deserve capital. Billerud’s sack paper is made on multi-product machines that also make kraft paper, formable paper and pulp; Mondi’s new machine is a dedicated asset on an integrated site. If the dedicated low-cost asset is right, the multi-product machine is a marginal tonne waiting to be repurposed. If demand disappoints, the dedicated asset has nowhere else to go.

The entrant that matters is not European. Guangxi Jianhui Paper, established in November 2020, has ordered a sack and kraft paper machine from Valmet — 7,450 millimetres of wire width, a basis weight range of 50 to 110 grams per square metre, a design speed of 1,300 metres a minute and a microcrepe extensible unit, scheduled to start at the end of 2026. It is described by the supplier as one of the largest sack kraft machine deliveries in Asia, and it was not specified as a domestic machine for a domestic price point. It was specified to export. Segezha’s bleached expansion on PM 11 — from 50 thousand to 150 thousand tonnes from 2026 — is the second, and both are aimed at the same thing: white, high-strength, printable kraft, which is where the price is.

Meanwhile the capacity that sanctions were supposed to remove was redirected rather than removed. Segezha’s February 2023 disposal of seven European converting mills — 704 million bags of annual capacity, about 13.2 per cent of European deliveries — took away a customer, not a paper machine. Its Karelia mill still runs up to 384 thousand tonnes of sack kraft and describes itself as capable of being the world’s third-largest sack paper manufacturer. That tonnage is a permanent cap on any European price recovery, and it sits structurally outside any policy the EU can apply.

Price stopped following demand in 2024

Sack kraft paper used to trade on demand. Since 2022 it has traded on cost, and the sequence is unusually legible. Mills announced increases at the end of 2024 and implementation through the first half of 2025 was patchy. By the second quarter of 2025 the increases had taken hold across Germany and Europe. The fourth quarter of 2025 was weak by more than normal seasonality and brown grades came under more pressure than white. The first quarter of 2026 delivered reductions on both brown and white grades. The second quarter reversed again with steep cost increases linked to conflict in the Middle East, and the upward trend continued into July with mills presenting further cost-driven demands for October.

Four direction changes in twenty-one months, none of them caused by a change in the demand for sacks. What actually swings this price is energy, pulp and freight. A sack kraft machine is among the more energy-intensive paper grades — low grammage at high strength means heavy refining and a large drying load per tonne, and the machines run continuously. When gas moves, the paper moves, and the converter finds out at the next quarterly negotiation.

That has a consequence for anyone buying this material on a fixed annual price: the risk is now carried by whoever signed last. Mills with integrated pulp and on-site energy recover fastest; merchant converters and non-integrated producers absorb the swing.

What the structure does to the people buying this paper

Four restraints bind, and only one of them is about demand.

Bulk substitution deletes tonnes permanently. Cement and building materials are 57 per cent of European paper sack deliveries and cement is the part that is shrinking. Global cement production is 4,034 million tonnes, about 1,300 million tonnes of it leaves the plant bagged or in small bulk containers — roughly 26 billion bags of all materials — and paper takes about 10 billion of those, or 1,280 thousand tonnes. A one-point shift in the global bagged share of cement is about 807 million sacks. Even at paper’s share of bagged cement, a whole percentage point of substitution removes less than one per cent of the tonnage in this report. Bulk substitution is a slow structural headwind on the sack outlet, not a threat to the market — and the survival of a 15.9 per cent fall in European sack deliveries in 2023 is the empirical proof.

The fibre basket cannot be bought. A sack kraft machine needs long-fibre softwood — spruce and pine — at roughly 1.1 to 1.3 tonnes of pulp per tonne of paper, with a pulp yield of 45 to 50 per cent, which is more than two tonnes of wood before energy. It competes for that log with pulp mills, board mills, sawmills and the energy market bidding for the same residues, and in the Nordic region also with the forest’s non-timber values. No amount of demand creates new sack kraft capacity where there is no forest — which is why a machine could be paused in Canada while North American demand grew 5 per cent, and why the industry’s answer to Asian demand growth is machines in Guangxi and Karelia rather than machines near the customer.

The same tonne of paper carries entirely different economics depending on which door it goes through. Integrated converter groups transfer paper internally and are insulated from merchant price. Independent converters buy on quarterly or annual contracts and carry the price risk. Merchants and traders move reel stock across regions and are the mechanism by which European paper reaches Asian and African converters. Export is 44.3 per cent of European output and is priced off the same benchmarks with freight as a swing factor. No published series distinguishes them.

And the sack still loses to woven polypropylene on arithmetic. At 20 sacks to a tonne of cement, a woven polypropylene sack at USD 0.132 adds USD 2.64 of packaging to a tonne of product; the multiwall paper sack at USD 0.30 adds USD 6.00 — 2.27 times as much. Paper wins where cement is expensive, carbon is priced, the buyer is a multinational or the regulation is European. Everywhere else the woven sack still carries the cement. Looked at from the paper side, the same fact is a cost structure: at USD 1,030 a tonne, the paper in a 128-gramme sack costs USD 0.132 — 43.9 per cent of the USD 0.30 the converter charges for the finished sack, and that converter’s ability to absorb a paper price increase is bounded by what a cement company will pay.

Watch list

  • Whether the EUDR application date holds at 30 December 2026. It has already been postponed once. A second postponement would remove the compliance advantage large integrated mills have spent two years building.
  • Whether the Mondi Canada project restarts. North American kraft demand grew 5 per cent in 2025 and US multiwall shipments grew 13.1 per cent to 389 thousand tonnes, with a further 6.7 per cent projected for 2026 — and there is no domestic sack kraft capacity to serve either.
  • Chinese grade quality. A 1,300 metre a minute machine with a microcrepe unit is the first Asian asset specified to the top of the range. If it can hold a European cement specification, the export balance of the whole industry changes.
  • The European energy price. Four price direction changes in twenty-one months, all cost-driven.
  • Recycled content reaching sack specification. Outside EUDR, outside the deforestation obligation, cheaper in fibre — and currently unable to make the load-bearing ply.
  • Further European closures. About 180 thousand tonnes of European capacity is running idle or intermittently after the Štětí addition. The next small single-machine site to lose its economics will be closed rather than sold.

Read the full report

The release summarises one finding from a report that carries the whole construction. Global Sack Kraft Paper Market Report, Size, Share and Forecast 2026–2033: 7.4 Million Tonnes, and the Third That Still Becomes a Sack — USD 7,620 million in 2025 to USD 9,880 million in 2033 at 3.30 per cent — contains the machine-level capacity census across Europe, Russia, Belarus, Turkey, Brazil and Asia; the two-grade price build behind USD 1,030 a tonne; the five end-use rows with their tonnage, realised price and price path set out separately; the grammage and property segmentation; the full six-stage value chain with the margin at each stage; the European closure-and-build arithmetic; the EUDR and PPWR obligation set; the Billerud and Mondi disclosure base; and the methodology, including the honest range of 6.9 to 7.8 million tonnes on the 2025 global base and what was not modelled.

Scope, method and what is not modelled

Value is mill net selling value in US dollars, ex-mill, excluding freight, insurance and distributor margin. It is not the price of a sack and it is not the price of a filled tonne of cement. Volume is paper shipped in thousand tonnes — not filled-product tonnage, not sack count and not pulp.

The base is built from one measured regional anchor, a machine-level capacity census and a disclosed price build. European demand of 1.25 million tonnes plus 993 thousand tonnes of net exports gives European production of 2,243 thousand tonnes, and dividing by the mid-point of the 87 to 90 per cent operating-rate range implies installed capacity of about 2,534 thousand tonnes. Price is built grade by grade rather than taken from a benchmark: unbleached at approximately USD 995 a tonne and bleached at approximately USD 1,120, weighted 72/28 and adjusted down for Chinese and Indian domestic tonnage that clears below the export benchmarks.

The global tonnage is stated as a range rather than a point: a Pheonix capacity census of named machines plus a residual for Chinese, Indian and Southeast Asian capacity puts 2025 consumption between 6.9 and 7.8 million tonnes, with 7.4 million as the central case. The range is wide because the world’s largest producing country publishes no machine-level register. Around 30 per cent of the judgement in the forecast rests on Pheonix’s own primary programme — structured interviews with mills and their sales organisations, open-ended interviews with converters and packaging procurement managers at cement, minerals, chemicals, feed and dry-food companies, briefings with machine builders, and a converter survey on grammage and qualification. Where a coefficient rests on primary judgement rather than a published series it is labelled a Pheonix estimate in the text.

Overlap disclosure: this tonnage sits inside the wider packaging market and inside the paper and board substrate aggregate; the share that becomes an industrial sack overlaps the industrial paper sacks report; and the cement-driven share of that overlaps the cement packaging report. These are four views of overlapping tonnage and not four separate markets, and they must not be added. No third-party market-research estimate is used, cited or referenced anywhere in this report.

About Pheonix Research

Pheonix Research publishes market intelligence built from primary research, official statistics and disclosed construction methods rather than purchased market-size figures. Its industrial packaging coverage runs across substrates, formats and end uses so that overlapping tonnage is reconciled rather than counted twice, and every published base carries its method, its range and its known gaps alongside it.